TP-Link TL-WR841HP User Manual page 44

Disable Security - If you do not want to use wireless security, check this radio button. But it's

strongly recommended to choose one of the following modes to enable security.
WPA-PSK/WPA2-PSK – Personal (Recommended) - It's the WPA/WPA2 authentication

type based on pre-shared passphrase.
• Version - you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.

Note:
If you check the WPA-PSK/WPA2-PSK – Personal (Recommended) radio button and
choose TKIP encryption, you will find a notice in red as shown in
TL-WR841HP 300Mbps High Power Router User Guide
Figure 4-18 Wireless Security
- 35 -
Figure 4-19.