TRENDnet TEW-751DR User Manual page 16

TRENDnet User's Guide
PBC (Software/Virtual Push Button)
Wireless > Wi-Fi Protected Setup
In addition to the hardware push button located physically on your router, the router
management page also has push button which is a software or virtual push button you
can click to activate WPS on your router.
1. Log into your router management page (see
on page 25).
2. Click on Wireless, and click on Wi-Fi Protected Setup.
3. To add a wireless device to your network, click the Connect button in the router
management page.
4. Make sure Auto is selected and click Next.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your router management page"
5. Select PBC and click Connect. Then push the WPS button on the wireless device
(consult wireless device's User's Guide for length of time) you are connecting.
6. Wait for your router to finsh the WPS process.
7. If successful, you will receive the message below. Click on Wireless Status to view the
information about the current wireless client devices connected to your router.
TEW-751DR
16