Table of Contents
Advertisement
7. Dismount the CD-ROM drive from the mount point.
For example, to dismount mount point /mnt, enter the command:
# umount /mnt
8. Remove the CD from the CD-ROM drive.
9. Shutdown and power-cycle the system.
The installation is now completed.
3.6
Display Power Management
On a workstation, display power management is enabled by default. On a server, it is
disabled by default. To enable display power management on a server, edit the X server
configuration file (/usr/var/X11/Xserver.conf) and add the "dpms" option to the
argument list. Refer to the example in Section 3.2.3.
Display power management dwell times can be set via the dpms option of the xset
command.
3.7
Messages
Device driver messages are typically logged to /var/adm/messages on Tru64 UNIX
systems. Should problems arise, this file should be checked for informational messages; an
example is shown here.
Radeon0: 100x100 cursor glyph truncated to hardware limits
The X server attempted to use a cursor larger than the 64x64 limits of the hardware. Cursor
glyph will be displayed incorrectly. Application should be brought into conformance with
X11 expectations.
Additional informational and error messages are logged by the Xserver in
/var/dt/Xerrors.
hp Tru64 UNIX Configuration 3-13
Hide quick links:
Advertisement
Table of Contents
