Special Features - Bissell Total Floors® Wet & Dry Hard Floor Cleaner 2949 User Manual

S
pecial Features
the following specialized cleaning
accessories are included with the purchase
of your Powerease/total floors Wet & dry
Hard floor cleaner:
the Powerease/total floors Wet & dry
Hard floor cleaner was designed to give
the user the ability to easily change between
the gentle clean™ brushes and Pads.
1. The Gentle Clean™ Brush is
recommended for use on Hard floor
surfaces such as tile, vinyl, or surfaces
that have grout or crevices where dirt
and grime collect.
2. The Gentle Clean™ Pad is intended
for use on more delicate surfaces such
as sealed hardwood, laminates or vinyl.
3. The Pleated Filter, located in the
lid of the collection tank should be
cleaned periodically.
to replace, visit www.bissell.com
A
ssembly
assembling your new bissell Powerease/
total floors Wet & dry Hard floor cleaner
is a simple 2-step Process:
NOTE: Remove Solution Tank
from unit first.
1. insert the Handle into the top of the
unit, making sure the spray trigger is
on the Wet Vacuum side. make sure
the screw opening in the handle is
aligned with the hole in the housing
of the unit.
2. insert screw; gently screw in until tight
with the body of the unit.
w w w . b i s s e l l . c o m
WARNING:
do not plug in your cleaner
until you have completely
assembled it per the following
instructions and are familiar
with all instructions and
operating procedures.
1
2
1
WARNING:
to reduce the risk of fire, use
only bissell Hard and Wood
floor cleaning solutions in
your Powerease/total floors
Wet & dry Hard floor cleaner.
use of cleaning formulas which
contain lemon or pine oil may
damage this appliance and
void the warranty. chemical
spot cleaners or solvent based
soil removers should not be
used. these products may react
with the plastic materials used
in your floor cleaner causing
cracking or pitting.
8 0 0 . 2 3 7 . 7 6 9 1
3
2
5