Dynex DX-60D260A13 User Manual page 17

Making connections
Using DVI
(same as HDMI but require
connection)
Note
You must use the HDMI 1/DVI jack to connect a DVD
or Blu-ray player using DVI. If you use another HDMI
jack, you will not hear sound from the TV speakers.
To connect a DVD or Blu-ray player using DVI:
1
Make sure that your TV's power cord is unplugged
and the DVD or Blu-ray player is turned off.
2
Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect
the adapter to the DVI OUT jack on the DVD or
Blu-ray player.
3
Connect the other end of the cable to the
HDMI1/DVI jack on the side of your TV.
Side of TV
4
Connect a 3.5mm audio cable (not provided) to the
PC/DVI AUDIO IN jack on the side of your TV and to
the AUDIO OUT jacks on the DVD or Blu-ray player.
5
Plug your TV's power cord into a power outlet, then
turn on your TV.
6
Turn on the DVD or Blu-ray player, then set it to the
correct output mode. For more information, see the
documentation that came with the player.
7
Press INPUT to open the INPUT SOURCE list.
8
Press or to select HDMI1, then press ENTER.
Note
You can also press HDMI one or more times to select
the DVD or Blu-ray player.
s an audio
DVD or Blu-ray player
Using component video (better)
To connect a DVD or Blu-ray player using component
video:
1
Make sure that your TV's power cord is unplugged
and the DVD or Blu-ray player is turned off.
2
Connect a component video cable (not provided) to
the VIDEO/Y, P , and P
B
and to the COMPONENT OUT jacks on the
component video device.
Cables are often color-coded to match color-coded jacks.
Note: The yellow video connector on the AV cable connects to the green VIDEO/Y jack.
Side of TV
3
Connect an audio cable (not provided) to the
AV IN AUDIO L/R jacks on the side of your TV and to
the L/R AUDIO OUT jacks on the DVD or Blu-ray
player.
Notes
• The VIDEO/Y, P
connect a component device) share the
AV IN AUDIO L/R jacks with the VIDEO/Y jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
4
Plug your TV's power cord into a power outlet, then
turn on your TV.
5
Turn on the DVD or Blu-ray player, then set it to the
correct output mode. For more information, see the
documentation that came with the player.
6
Press INPUT to open the INPUT SOURCE list.
7
Press or to select COMP/AV, then press ENTER.
Note
You can also press VIDEO to select the DVD or Blu-ray
player.
13
DX-60D260A13
jacks on the side of your TV
R
DVD or Blu-ray player
, and P video jacks (used to
B R