Dynex DX-60D260A13 User Manual page 14

10
DX-60D260A13
Using DVI (same as HDMI but requires an audio
connection)
Note
You must use the HDMI1/DVI jack to connect a cable
or satellite box using DVI. If you use another HDMI
jack, you will not hear sound from the TV speakers.
To connect a cable or satellite box using DVI:
1
Make sure that your TV's power cord is unplugged,
and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect
the adapter to the DVI OUT jack on the cable or
satellite box.
4
Connect the other end of the cable to the
HDMI1/DVI jack on the side of your TV.
5
Connect a 3.5mm audio cable (not provided) to the
PC/DVI AUDIO IN jack on the side of your TV and to
the AUDIO OUT jacks on the cable or satellite box.
Note
When you connect the audio using the
PC/DVI AUDIO IN jack, the audio output is analog.
6
Plug your TV's power cord into a power outlet, turn
on your TV, then turn on the cable or satellite box.
7
Press INPUT to open the INPUT SOURCE list.
8
Press or to highlight HDMI 1, then press ENTER.
Cable or satellite box
Side of TV
Using component video (better)
To connect a cable or satellite box using component
video:
1
Make sure that your TV's power cord is unplugged,
and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a component video cable (not provided) to
the VIDEO/Y, P , and P
B
your TV and the component video out jacks on the
cable or satellite box.
Cables are often color-coded to match color-coded jacks.
Cable or satellite box
Side of TV
4
Connect an audio cable (not provided) to the
AV IN AUDIO L/R jacks on the side of your TV and to
the audio out jacks on the cable or satellite TV box.
Note
• The VIDEO/Y, P
connect a component device) share the
AV IN AUDIO L/R jacks with the VIDEO/Y jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
5
Plug your TV's power cord into a power outlet, turn
on your TV, then turn on the cable or satellite box.
6
Press INPUT to open the INPUT SOURCE list.
7
Press or to highlight COMPONENT/AV then
press ENTER.
Making connections
video jacks on the side of
R
, and P video jacks (used to
B R