Figure 3-6. Setting the Write-Protect Switch
To set the switch, slide it left or right to the desired position.
Notice: Always set the write protection tab prior to loading the cartridge into the
Caring for Tape Cartridges
Notice: Do not insert a damaged tape cartridge into your tape drive. A damaged
Incorrect handling or an incorrect environment can damage the LTO Ultrium Tape
Cartridge or its magnetic tape. To avoid damage to your tape cartridges and to
ensure the continued high reliability of your tape drive, use the following
guidelines.
Provide Training
v Post procedures that describe proper media handling in places where people
v Ensure that anyone who handles tape has been properly trained in handling and
v Ensure that any service or contract personnel who perform archiving are
v Include media-handling procedures as part of any services contract.
v Define and make personnel aware of data recovery procedures.
Ensure Proper Packaging
v When you ship a cartridge, ship it in its original or similar packaging.
v Always ship or store a cartridge in a jewel case.
v Use only a recommended shipping container that securely holds the cartridge in
1
Write-Protect Switch
drive. Sliding the tab after loading will cause unpredictable results and
could result in drive errors or backup failure.
cartridge can interfere with the reliability of the drive and may void the
warranties of the drive and the cartridge. Before inserting a tape cartridge,
inspect the cartridge case, cartridge door, and write-protect switch for
breaks.
gather.
shipping procedures. This includes operators, users, programmers, archival
services, and shipping personnel.
properly trained in media-handling procedures.
its jewel case during transportation.
Chapter 3. Using the Tape Drive
3-5