Table of Contents
Advertisement
OTHER ADJUSTMENTS (OTHERS MENU) (Continued)
Eliminating Flicker (Vertical sync)
Corrects the vertical synchronization signal timing to eliminate vertical flicker.
Use
or
to specify a value between -2 and +1.
Adjusting Clamp Pulse (Clamp pulse)
Adjusts clamp pulse in accordance with the input signal received from connected
equipment.
Clamp pulse is automatically set at the optimal level when you do not use this option.
Use
or
to specify a value between 0 and 8.
Enabling AGC (AGC)
Determines whether to employ AGC.
Each time you press
or
sequence:
On
Off
On: Automatically adjusts the gain to the optimal level.
Off: Maintains the gain constant.
Making White Areas Appear Even Whiter (Bluish white)
Makes on-screen white areas appear even whiter.
Each time you press
or
sequence:
On
Off
On: Enables this function.
Off: Disables this function.
Displaying System Status (Status)
Displays system operation status.
(1) Select "Status" and press
The "Status" information screen will appear.
(2) Check the status. Press
(3) Press
to return to the OTHERS Menu screen.
M E N U
Mode: Input mode appears at the upper right corner of the screen.
Monitor No.: Monitor number
Frequency: Frequency and polarity (fH, fV) (
Speaker: Speaker type
Freq. scan: Frequency scanning (
Video mode: Video mode (
Input signal: Signal type
Preset No.: RGB parameter number (
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode,
: S-video mode,
V
S
E-34
, one of the available choices appears in the following
, one of the available choices appears in the following
or
.
E N T E R
when you wish to update the status.
E N T E R
,
,
C
R1
,
)
R1
R2
,
only)
V
S
,
only)
R1
R2
: Comp.video mode,
C
R1
C R1 R2
C R1 R2
V S C
V S
V S C R1 R2
)
R2
: RGB1 mode,
: RGB2 mode
R2
Ｓｔａｔｕｓ
Ｍｏｎｉｔｏｒ Ｎｏ． ０
Ｓｐｅａｋｅｒ
Ｉｎｔｅｒｎａｌ
Ｖｉｄｅｏ ｍｏｄｅ
ＮＴＳＣ
Ｉｎｐｕｔ ｓｉｇｎａｌ
５２５Ｉ／６０Ｈｚ
ＭＥＮＵｒｅｔｕｒｎ
ＥＮＴＥＲｒｅｎｅｗ
"Status" information screen (Video Input
Mode)
Ｓｔａｔｕｓ
Ｍｏｎｉｔｏｒ Ｎｏ． ０
Ｓｐｅａｋｅｒ
Ｉｎｔｅｒｎａｌ
Ｆｒｅｑ． ｓｃａｎ
Ａｕｔｏ
Ｉｎｐｕｔ ｓｉｇｎａｌ
Ｓｅｐａｒａｔｅ
Ｆｒｅｑｕｅｎｃｙ
ｆＨ ３１．７ｋＨｚ／−
ｆＶ ５０．０ Ｈｚ／−
Ｐｒｅｓｅｔ Ｎｏ．
２５５
ＭＥＮＵｒｅｔｕｒｎ
ＥＮＴＥＲｒｅｎｅｗ
"Status" information screen (RGB Input
Mode)
Ｖｉｄｅｏ
ＲＧＢ１
Advertisement
Table of Contents
