Fujitsu Plasmavision PDS4213W-H User Manual page 41

When rotating text (for installing the display with one of its sides
facing down)
• Rotating text (OSD rotate)
You can use this option to rotate the text.
Each time you press or , one of the available choices appears in the following sequence:
-90 Deg. Normal
-90 Deg.: Displays text from left to right when the display is installed with the power indicator
lamp at the top.
Normal: Displays text normally.
+90 Deg.: Displays text from left to right when the display is installed with the power indicator
lamp at the bottom.
When selecting automatic switching to desired mode
• Input mode of priority (Input priority)
You can use this option to switch between modes only when a signal is received through the
selected input mode terminal. You cannot switch the input mode.
Each time you press or , one of the available choices appears in the following sequence:
Off Video S-video
Off: Switches between modes normally.
Other modes: Displays images when a signal is received through the selected input mode
terminal.
* You cannot switch between RGB1 and RGB2.
You cannot select the currently selected mode.
You cannot switch between input modes when you have selected a mode with this option.
When changing sound input
• Selecting input terminals (Audio input)
You can use this option to select one of the two available terminals to receive sound from input
equipment.
1 Select "Audio input" and press
The "Audio input" selection screen will appear.
2 Press
or to select input equipment.
3 Select a desired input terminal.
Each time you press or
Audio 1 Audio 2
Audio 1, Audio 2: Selects Audio 1 or 2 for receiving sound in the corresponding mode.
No audio: No sound in the corresponding mode.
* Repeat steps 2 and 3 for each piece of input equipment.
4 Press
when you finish to return to the Extended menu screen.
M E N U
• Enabling 3D Y/C Circuit (3D Y/C)
Selects whether to use the 3D Y/C circuit.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On: Enables the 3D Y/C circuit.
You can make this selection only for 3.58NTSC signal.
Off: Enables 3-line.
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, : S-video mode,
V S
+90 Deg.
Comp.video RGB1
or .
E N T E R
, one of the available choices appears in the following sequence:
No audio
: Comp.video mode, : RGB1 mode,
C R1
All modes
All modes
RGB2
All modes
"Audio input" selection screen
V
: RGB2 mode
R2
Ａｕｄｉｏ ｉｎｐｕｔ
ＲＧＢ１ Ａｕｄｉｏ １
ＲＧＢ２ Ａｕｄｉｏ １
Ｖｉｄｅｏ Ａｕｄｉｏ ２
Ｓ−ｖｉｄｅｏ
Ａｕｄｉｏ ２
Ｃｏｍｐ． ｖｉｄｅｏ
Ａｕｄｉｏ ２
ＭＥＮＵｒｅｔｕｒｎ
ｓｅｌｅｃｔ
E-39