LAN port LED indications
ACT/LINK LED
Status
OFF
GREEN
BLINKING
2.7.2
Internal connectors
1.
Floppy disk drive connector (34-1 pin FLOPPY1)
This connector is for the provided Floppy Disk Drive (FDD) signal
cable. Insert one end of the cable to this connector, then connect the
other end to the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection
when using a FDD cable with a covered Pin 5.
P5M2-M Floppy Disk Drive Connector
2-24
Description
Status
No link
OFF
Linked
ORANGE
Data activity
GREEN
®
SPEED LED
Description
10 Mbps connection
100 Mbps connection
1 Gbps connection
FLOPPY1
PIN 1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
Chapter 2: Hardware information
ACT/LINK
SPEED
LED
LED
LAN port