2.
Push down two fasteners at
a time in a diagonal sequence
to secure the heatsink and fan
assembly in place.
3.
Connect the CPU fan cable to the connector on the motherboard
labeled CPU_FAN1/CPU_FAN2.
P5M2-M CPU Fan Connectors
•
•
2-10
A
B
B
A
®
Do not forget to connect the CPU fan connector! Hardware
monitoring errors can occur if you fail to plug this connector.
If there is only one CPU fan cable, connect it to the connector
labeled CPU_FAN1. Failure to do so may cause hardware monitoring
errors. Set the CPU fan pin selection jumper to use a 3-pin or 4-pin
fan cable plug. Refer to "2.6 Jumpers" for deatails.
A
CPU_FAN1
CPU_FAN2
Chapter 2: Hardware information
B
A
B