Table of Contents
Advertisement
5.3
LSI Logic Embedded SATA RAID Setup
Utility
The LSI Logic Embedded SATA RAID Setup Utility allows you to create
RAID 0, RAID 1, and RAID 10 set(s) from SATA hard disk drives connected
to the SATA connectors supported by the motherboard Southbridge chip.
The LSI Logic Embedded SATA RAID automatically configures a RAID 1
(Mirrored) set when the SATA is configured as RAID in the BIOS and you
installed two hard disk drives without a RAID configuration.
To enter the LSI Logic Embedded SATA RAID Setup Utility:
1.
Turn on the system after installing all the SATA hard disk drives.
2.
During POST, the LSI Logic Embedded SATA RAID Setup Utility
automatically detects the installed SATA hard disk drives and displays
any existing RAID set(s). Press <Ctrl> + <M> to enter the utility.
You may also create a RAID set(s) in a Windows
using the Global Array Manager (GAM) application. Refer to the GAM user
guide in the motherboard support CD for details.
5-14
operating environment
®
Chapter 5: Driver installation
Advertisement
Table of Contents
