Table of Contents
Advertisement
3.
After selecting the drive to rebuild, press <F10>. The indicator for the
selected drive now shows RBLD.
4.
When prompted, press <Y> to to rebuild the drive.
5.
When rebuild is complete, press any key to continue.
Using the Objects command
To rebuild a failed hard disk drive using the Objects command:
1.
From the Management Menu, select Objects, then select Physical Drive
from the menu.
2.
Use the arrow keys to select the physical drive you want to rebuild,
then press <Enter>.
3.
Select Rebuild from the pop-up menu, then press <Enter>.
4.
When prompted, press <Y> to to rebuild the drive.
5.
When rebuild is complete, press any key to continue.
5-30
Chapter 5: Driver installation
Advertisement
Table of Contents
