Opening The Chassis; Removing/Installing The Front Door; Side Panel Screws; Opening/Installing The Left Panel - Asus AR1000 Hardware Reference Manual

II. System Components
• 2-4. Opening the Chassis
This section and the following sections give descriptions on how to install
and remove components. When setting up devices on the system, perform
the following steps.
Leaving some space for pushing the
left panel in place
16 16 AR1000 RAID Subsystem Hardware Reference Guide
Removing/Installing
the Front Door
To remove the front door, push
down on the hinge spring as
shown.
To install the front door, press the
hinge spring, insert the door pins
into the holes on the top and bot-
tom panels, and then release the
hinge spring.

Side Panel Screws

There are two identical side pan-
els on the chassis, one on each
side. The side panels are secured
by two large thumb screws on the
front of the system, which can be
turned with your fingers.
Opening/Installing
the Left Panel
To open the left side of the panel,
remove the side panel screw, and
then pull the handle outward
while pulling the panel forward.
To install the left panel, first place
the back of the panel onto the
chassis, leaving a gap of about 1
cm between the left and back pan-
els. Push the panel front inward
and then slide it backward.