Table of Contents
Advertisement
• 1-4. Safeguards
Observe the following safety instructions any time you are connecting or
disconnecting any devices.
Operation Safety
IMPORTANT
• Any operation on this system must be conducted by certified
or experienced persons.
• Before operating your system, carefully read all the manuals
included with the system package.
• Before using the system, make sure all cables are correctly
connected and the power cables are not damaged. If any dam-
age is detected, contact the vendor as soon as possible.
• To avoid short circuits, keep paper clips, screws, and staples
away from connectors, sockets and circuitry.
• Before opening the chassis panels, make sure all power cables
are unplugged.
• Avoid dust, humidity, and temperature extremes. Place the
system on a stable surface.
• If the power supply is broken, do not try to fix it by yourself.
Contact an authorized vendor.
• It is recommanded that you wear gloves when assembling or
dissembling the system to protect from cuts and scrapes.
• When the system is powered on, the surfaces of certain IC
devices may be hot. Do not touch them. Check whether the
fans are functioning properly.
Tools Required
A Phillips (cross) screwdriver and a standard (flat) screwdriver are needed
to install or remove the components in this system.
AR1000 RAID Subsystem Hardware Reference Guide
I. Introduction
11
Advertisement
Table of Contents
