Panasonic PT-AE8000U Operating Instructions Manual page 51

■ [CONTRAST]
You can adjust color temperatures centering mainly on
white.
R (RED), G (GREEN), B (BLUE)
-1
[ADVANCED MENU] menu items
[CONTRAST R]
[CONTRAST G]
[CONTRAST B]
z Setting range: -32 to +32
■ [BRIGHTNESS]
You can adjust color temperatures centering mainly on black.
R (RED), G (GREEN), B (BLUE)
-1
[ADVANCED MENU] menu items
[BRIGHTNESS R]
[BRIGHTNESS G]
[BRIGHTNESS B]
z Setting range: -16 to +16
■ [NR]
You can eliminate the noise that occurs when the input
signal deteriorates.
Weaken
z Setting range: 0 to +3
■ [MPEG NR]
+1
z Setting range: 0 to +3
Default
Attention
setting
z Use a strong setting when projecting an MPEG video.
0
z COMPUTER (RGB) signal is not supported.
0
■ [FRAME CREATION]
0
Switch settings
+1
Default
setting
0
0
0
Note
z With some of the images, it might be difficult to see a
z If [FRAME CREATION] is set to active, video may be
z This cannot be set to active when [2D TO 3D] (
Strengthen
[PICTURE] menu
You can eliminate the noise that occurs upon projection for
videos that use MPEG compression.
Weaken
You can activate the rendering system for fast motion
frames with fewer afterimage.
[OFF]
[MODE3]
[OFF] Deactivate
[MODE1] Setting for a standard image
[MODE2] Setting for a theater image
[MODE3] Setting for a fast moving image
difference in result.
delayed in some cases. In this case, select [OFF].
is enabled.
Strengthen
Switch settings
[MODE1]
[MODE2]

page 69)
ENGLISH - 51