Signal Mode - Panasonic PT-AE8000U Operating Instructions Manual

5) Press the ▲▼◄► buttons to select [OK].
6) Press the <ENTER> button.
Note
z Press the <ENTER> button without entering any text to
keep the default name ([MEMORY1-16]).
■ [MEMORY LOAD]
You can access the details saved through [MEMORY
SAVE].
MEMORY LOAD
PICTURE MEMORY1
MEMORY2
POSITION MEMORY3
MEMORY4
LANGUAGE MEMORY5
MEMORY6
1) Press the ▲▼ buttons to select the
MEMORY7
3D SETTINGS
MEMORY8
memory name to be called.
MEMORY9
LENS CONTROL
MEMORY10
2) Press the <ENTER> button.
MEMORY11
OPTION
z The video adjustments for the recalled memory MEMORY12
MEMORY13
name are switched to.
Note
z If there is no saved setting in the [MEMORY SAVE] or
[ALL DELETE] has been performed, the [MEMORY
LOAD] menu will not be selectable.
z For details how to access with the remote control, see
"Loading a saved setting" in "Remote control operation".

( page 33)
■ [MEMORY DELETE]
You can delete memory entries.
MEMORY DELETE
PICTURE MEMORY1
MEMORY2
POSITION MEMORY3
MEMORY4
MEMORY5
LANGUAGE
MEMORY6
MEMORY7
3D SETTINGS
1) Press the ▲▼ buttons and select the
MEMORY8
MEMORY9
memory name to be deleted. LENS CONTROL
MEMORY10
OPTION MEMORY11
2) Press the <ENTER> button.
MEMORY12
MEMORY13
z Select [ALL DELETE] to delete all memory entries.
z [MEMORY DELETE] confirmation message is
displayed.
MEMORY DELETE
DELETE THE MEMORY 1 DATA.
OK
3) Select [OK] with the ◄ ► buttons.
4) Press the <ENTER> button.
1/2
1/2
CANCEL
[PICTURE] menu
■ [MEMORY NAME CHANGE]
You can edit the memory name settings.
MEMORY NAME CHANGE
PICTURE MEMORY1
MEMORY2
POSITION MEMORY3
MEMORY4
LANGUAGE MEMORY5
MEMORY6
3D SETTINGS MEMORY7
1) Press the ▲▼ buttons and select the
MEMORY8
MEMORY9
memory name to be changed. LENS CONTROL
MEMORY10
MEMORY11
OPTION
2) Press the <ENTER> button.
MEMORY12
z The [MEMORY NAME INPUT] screen is displayed. MEMORY13
MEMORY NAME INPUT
A B C D E F
N O P Q R S
a b c d e f
n o p q r s
1 2 3 4 5 6
! " # $ % &
~
_ ` | ( )
OK
3) Press the ▲▼◄► buttons to specify
the location of the required character to
enter and press the <ENTER> button.
z You can enter up to 16 characters.
z Select [ALL DELETE] and press the <ENTER>
button to erase all input text. If you press the
<DEFAULT> button on the remote control, you can
erase the character currently selected by the cursor
in the input box.
4) Press the ▲▼◄► buttons to select [OK].
5) Press the <ENTER> button.
Note
z Press the <ENTER> button without entering any text to
keep the default name ([MEMORY1-16]).

SIGNAL MODE

(Available with signals from COMPUTER IN/
COMPONENT IN/HDMI IN only.)
The name of the signal being projected is displayed.
Note
z See "List of compatible signals" for signal details.
(  page 100)
1/2
ALL DELETE
G H I J K L M
T U V W X Y Z
g h i j k l m
t u v w x y z
7 8 9 0 SPACE
' + - / = ? @ \ ^
＊
< > [ ] { } , . : ;
CANCEL
ENGLISH - 59