Panasonic PT-AE8000U Operating Instructions Manual page 49

Example) When the data for gamma preset value
+0.40 and gamma preset value 0.00 is combined
ADVANCED ADJUST
1. Set [GAMMA PRESET] to +0.40, display the
PICTURE GAMMA PRESET
adjustment screen for any one of [Y], [R], [G], and [B],
REFERENCE POINTS
or then press the <FUNCTION> button to refresh the
POSITION
reference points.
Y
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
0%
POINT 8
2. Press the <RETURN> button to return to the screen
displayed in 4), and then select [GAMMA PRESET]
with the ▲ ▼ buttons.
3. Set [GAMMA PRESET] to [0.00] with the ◄►
buttons.
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
The reference points refreshed earlier are displayed.
ADVANCED ADJUST
PICTURE 4. Select one of [Y][R][G][B] and press the <ENTER> GAMMA PRESET
button.
REFERENCE POINTS
5. Adjust the output level with the ▲ ▼ buttons using
POSITION
the reference points as the standard.
Y
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
0%
POINT 8
+0.40
OFF
R G B
50% 100%
INPUT 40% OUTPUT -16
ADVANCED ADJUST
GAMMA PRESET 0.00
REFERENCE POINTS ON
Y R G
0% 50%
POINT 8 INPUT 40% OUTPUT
0.0
ON
R G B
50% 100%
INPUT 40% OUTPUT 0
Note
z If you change the output level of the reference point from
the preset value, a confirmation screen is displayed when
changing [GAMMA PRESET].
GAMMA PRESET
ADJUSTED CUSTOM CURVE DATA WILL BE DELETED.
e. Returning the output level to the default setting
z If you press the <DEFAULT> button while the output
level is being adjusted in c. or d. described on the
previous page, the output level of the currently
selected point returns to the default setting.
z If you press and hold the <DEFAULT> button for
three seconds or more while the output level is
being adjusted in c. or d. described on the previous
page, the output level of all points returns to the
default setting.
Note
z The input level does not return to the default setting even
when the <DEFAULT> button is pressed.
B
100%
0
[PICTURE] menu
IF GAMMA PRESET IS USED.
OK CANCEL
ENGLISH - 49