Menu Navigation; Navigating Through The Menu - Panasonic PT-AE8000U Operating Instructions Manual

Menu navigation

Navigating through the menu

■ Operating procedure
Press
1) Press the <MENU> button on the remote
control or in the controls of the projector.
z The main menu is displayed.
PICTURE MODE
PICTURE CONTRAST
BRIGHTNESS
COLOR
POSITION
TINT
LANGUAGE COLOR TEMPERATURE
SHARPNESS
DYNAMIC IRIS
3D SETTINGS
WAVEFORM MONITOR
SPLIT ADJUST
LENS CONTROL
ADVANCED MENU
PICTURE MEMORY
OPTION
2) Press the ▲▼ buttons to select main
menu items.
z Select the item to be adjusted from the 6 items
[PICTURE], [POSITION], [LANGUAGE], [3D
SETTINGS], [LENS CONTROL] and [OPTION].
The selected item is indicated with a yellow cursor,
and the submenu is displayed on the right hand
side.
H-POSITION
PICTURE V-POSITION
ASPECT
POSITION WSS
OVER SCAN
LANGUAGE KEYSTONE
3D SETTINGS
LENS CONTROL
OPTION
3) Press the <ENTER> button.
z The submenu is displayed, and submenu items
become selectable.
4)
NORMAL
0
Note
0
0
z Pressing the <RETURN> or <MENU> button when the
0
menu screen is displayed returns to the previous screen.
0
z Depending on the signal input, some items may not be
SIMPLE
ON adjustable and some functions may not be usable.
z Some items can be adjusted even if a signal is not input.
z See page 38 for the submenu items.
z When a 3D image is being displayed, the "3D icon" can
be seen at the top left of the menu screen.
■ Returning adjusted values to default
settings
Press the <DEFAULT> button on the remote control
to return the settings/adjustment values to default
settings.
Press
0
This function differs depending on the screen displayed.
0
16:9
● When the submenu screen is displayed:
ON
0
0
their default settings.
● When individual adjustment screen is displayed:
Only the item currently being adjusted is returned
to its default settings.
Note
z All settings cannot be simultaneously returned to default
settings.
z Some items do not return to default settings even you
press the <DEFAULT> button. Please set those items
individually.
z The vertical bar above the bar scale on the individual
adjustment screen indicates the default setting.
The position of the vertical bar varies depending on the
input signal.
Menu navigation
Press the ▲▼ buttons to select the
submenu item you wish to alter, then
press the to switch settings/adjust.
z For items where the setting is switched or that have
a bar scale, the menu screen disappears and only
the selected item (individual adjustment screen) is
displayed, as shown in the diagram below.
H-POSITION
z For items that are only names, pressing the
<ENTER> button displays the next screen and
advanced settings can be performed.
3D
The submenu items displayed are returned to
H-POSITION
Default setting
Current setting
0
0
0
0
0
0
0
0
ENGLISH - 37