Brother HL-S7000DN Quick Setup Manual page 27

Quick setup guide - english

Hide thumbs Also See for HL-S7000DN:

Table of Contents

For Wireless Network Users

Error code

The machine cannot detect a WLAN access point/router that has WPS or AOSS™

enabled.

If you would like to configure your wireless settings using WPS or AOSS™, you must

operate both your machine and the WLAN access point/router.

Confirm your WLAN access point/router supports WPS or AOSS™ and try starting again.

TS-07

If you do not know how to operate your WLAN access point/router using WPS or AOSS™,

see the documentation provided with your WLAN access point/router, ask the

manufacturer of your WLAN access point/router or ask your network administrator.

Two or more WLAN access points that have WPS or AOSS™ enabled are detected.

- Confirm that only one WLAN access point/router within range has the WPS or AOSS™

TS-08

method active and try again.

- Try starting again after a few minutes in order to avoid interference from other access

points.