For Network Users; Web Based Management; Web Browser; Factory Default - Brother HL-S7000DN Quick Setup Manual

For Network Users

Web Based Management

(web browser)

The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
We recommend Microsoft
®
Explorer 7.0/8.0 or Firefox 3.6 for Windows
and Safari 4.0/5.0 for Macintosh. Please also
make sure that JavaScript and Cookies are
always enabled in whichever browser you use. To
use a web browser, you will need to know the IP
Address of the print server. The IP Address of the
print server is listed on the Printer Settings Page.
a
Open your browser.
b
Type "http://machine's IP address/" into your
browser's address bar (where "machine's IP
address" is the IP address of the Brother
machine or the print server name).
For example: http://192.168.1.2/

Note
• If you have configured an optional login
password, you must enter it when prompted to
access the Web Based Management.
• For more information, see Web Based
Management in the Network User's Guide.
32
®
Internet
®
Reset the network settings to the

factory default

To reset all network settings of the print server to its
factory default, follow the steps below.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Network Reset.
Press OK.
d
Press 1 to choose Reset and then press 1 to
restart the machine.
The machine will restart.

Print the Printer Settings Page

The Printer Settings Page lists all the current printer
settings, including network settings.
a
Press Menu.
b
Press a or b to choose Machine Info.
Press OK.
c
Press OK to choose Print Settings.
The machine will print the current printer
settings.
Note
If the IP Address on the Printer Settings Page
shows 0.0.0.0, wait for one minute and try again.