Cable Connector Specifications; Device Connection; Cable Connections - Fujitsu MPB3021AT Product Manual

3.3.2

Cable connector specifications

Table 3.2 lists the recommended specifications for the cable connectors.
ATA interface cable
(40-pin, CN1)
Power supply cable
(CN1)
Note :
The cable of twisted pairs and neighboring line separated individually is not allowed to use
for the host interface cable. It is because that the location of signal lines in these cables is
not fixed, and so the problem on the crosstalk among signal lines may occur.
3.3.3

Device connection

Figure 3.8 shows how to connect the devices.
ATA interface cable
Host system
3 - 8
Table 3.2 Cable connector specifications
Name
Cable socket
(closed-end type)
Cable socket
(through-end type)
Signal cable
Cable socket housing
Contact
Signal cable
Disk Drive #0
Disk Drive #1
Figure 3.8

Cable connections

C141-E045-02EN
Model
FCN-707B040-AU/B
FCN-707B040-AU/O
445-248-40
1-480424-0
60617-4
AWG 18 to 24
Power supply cable
DC
power supply
Manufacturer
Fujitsu
Fujitsu
SPECTERS STRIP
AMP
AMP