D-Link DSA-3100 - Airspot - Gateway Quick Installation Manual page 7

Using The Setup Wizard (continued)
Specify the DHCP Server Settings.
Specify a range of IP addresses to assign
the DHCP clients. The range is entered
in the format "Start IP – End IP" i.e.
192.168.0.101 – 192.168.0.200. Enter the
Domain Name and Primary DNS Server
settings for the clients. Entering a
Secondary DNS Server is optional.
Click Next
Select the User Manager based on the
authentication methods you are using.
For the purpose of this Quick Installation
Guide we will select the Local User
authentication method.
Click Next
Enter a User Name and Password
information as necessary. User
Accounts can be restricted to specific
MAC addresses if desired. Click Add
after entering each User Account.
Repeat this step for each user.
Click Next
7