E-Mail Setup - D-Link DNR-326 User Manual

Section 3 - Configuration
Server Address: SMTP (Simple Mail Transport Protocol) server IP
address.
Port: Specify the port number of email server.
The default number is 25.
Use SSL: Check this if your email server use SSL protocol.
Sender: Enter the sender's name.
Subject: Enter the e-mail subject.
Body of Message: Enter the e-mail content.
SMTP Provide the user name and password to the SMTP
Authentication: server for identification before sending e-mail.
User Name: Input the SMTP server login user name.
Password: Input the SMTP server login user password.
Send Testing Mail: Click this button and the system will send a test
mail to the sender. Please check it after testing.
Add Contacts
Step 1: Insert the name of a new contact.
Step 2: Insert the e-mail address of this new contact.
Step 3: Click the Add Contact button.
Step 4: Click the Save Settings button to save the new contact list.
D-Link DNR-326 User Manual

E-mail Setup

31