Event Setup - D-Link DNR-326 User Manual

Section 3 - Configuration
Step 1: Select an event below.
Hard Disk When the Overwrite function is not enabled, NVR
Space Full: will stop recording when HDD full.
Step 2: Click the Add button to setup the actions of the
event.
E-mail: If the event occurs, the system will send an e-mail
to the pre-set contacts.
Step 3: Click the action, and then click the Configure
button to modify the details of that action if
necessary.
Step 4: Repeat step 2 through 3 to add more actions.
D-Link DNR-326 User Manual

Event Setup

28