Fujitsu MHR2010AT Product Manual page 149

Status Byte
00h or 80h
02h or 82h
03h or 83h
04h or 84h
05h or 85h
06h or 86h
40 to 7Fh
C0h to FFh
01h or 81h
07h or 3Fh
87h to BFh
Self test execution status
Bit
0 to 3:
4 to 7:
= 0h:
= 1h:
= 2h:
= 3h:
= 4h:
= 5h:
= 6h:
= 7h:
= 8h:
= 9h:
= Ah:
= Bh:
= Ch to Eh:
= Fh:
C141-E145-02EN
Off-line data acquisition is not executed.
Off-line data acquisition has ended without an error.
Reserved
Off-line data acquisition is interrupted by a command from the host.
Off-line data acquisition has ended before completion because of a
command from the host.
Off-line data acquisition has ended before completion because of an
error that makes acquisition impossible. (Not used)
Vendor unique (Not used)
Reserved
Remainder of the self-test is indicated as a percentage in a range
of "0h to 9h" (corresponding to 0 to 90%).
Self-test execution status
Self-test has ended successfully, or self-test has not been
executed.
Self-test is suspended by the host.
Self-test is interrupted by a soft/hard reset from the host.
Self-test cannot be executed.
Self-test has ended with an abnormality because of unknown
contents.
Self-test has ended with "Write/Read Test" error.
Self-test has ended with "Servo Check," "Pre-SMART Check," or
"Post-SMART Check" error.
Self-test has ended with "SMART Drive Error Log Check,"
"Random Read Test," or "Read Scan Test" error.
Reserved
Reserved
Reserved
Reserved
Reserved
Self-test is in progress.
5.3 Host Commands
Meaning
Meaning
5-75