Controlling Ipod & Other Components; Controlling Ipod; Connecting The Ipod Directly To The Usb Port - Onkyo DTR-40.2 Instruction Manual

Controlling iPod & Other Components

Controlling iPod

Connecting the iPod Directly to the
USB Port
USB can be used to play music files stored on iPod/
iPhone, which can be plugged into the AV receiver's USB
port.
Playing Music Files on the iPod/iPhone
This section explains how to play music files on the iPod/
iPhone .
*1
*1 Compatible iPod models
Made for:
• iPod touch (1st and 2nd generation)
• iPod classic
• iPod (5th generation)
• iPod nano (1st, 2nd, 3rd, 4th and 5th generation)
• All iPhone models
En
82
USB port
Display
NET/USB
Album +/–
/ , Enter,
Playlist /
Return
, , ,
, ,
Repeat
Random
1
Press NET/USB repeatedly to select the USB
input.
2
Connect the USB cable that comes with the iPod/
iPhone to the USB port at the front of the AV
receiver.
• The USB indicator lights
is able to read the iPod/iPhone.
• The USB indicator flashes if the AV receiver can-
not read the iPod/iPhone.
Push "DISPLAY" button switch to Extended mode.
3
Press Display to switch to Extended Mode
A list of your iPod model's contents appears. To
open a folder, use / to select it, and then press
Enter.
Tip
• With the default settings, the iPod/iPhone can be manipu-
lated as Standard Mode
• Pressing Display again switches back to Standard Mode.
*2 The following iPod models are not supported in Stan-
dard Mode. These iPod models can only be controlled
in Extended Mode.
*3 When you disconnect the iPod/iPhone, the AV receiver
stores the mode. This means that if you disconnect
when in Extended Mode, the AV receiver will start in
Extended Mode when you next connect the iPod/
iPhone.
4
Use / to select a music file, and press Enter or
to start playback.
• To return to the previous menu during playback,
press Return.
• To stop or pause playback, press
tively.
• To select the next song, press
beginning of the current song, press
the previous song, press
• To fast forward the current song, press
fast reverse the current song, press
• To switch the repeat mode, press Repeat. To
switch the random mode, press Random.
Standard Mode control
, The content information is not displayed
be manipulated using the iPod/iPhone or the Remote Con-
trol.
Note
• The audio of video content can be played back but no video will
be displayed onscreen.
(➔ 9) if the AV receiver
iPod(STD)
*2 .
or , respec-
. To select the
. To select
twice.
.
onscreen
*3 .
. To
, but can