Using An Rihd-Compatible Tv, Player, Or Recorder - Onkyo DTR-40.2 Instruction Manual

Using an RIHD-compatible TV, Player, or Recorder

, which stands for Remote Interactive over HDMI, is the name of the system control function found on Integra/
Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system con-
trol over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however,
operation with components other than
■
About -compatible components
The following components are
of February 2010) See the Onkyo web site for latest infor-
mation.
TV
• Panasonic VIERA Link compatible TV
• Toshiba REGZA-LINK compatible TV
• Sharp TV (See Onkyo web site for latest information on
compatible models.)
Players/Recorders
• Onkyo and Integra
• Panasonic VIERA Link compatible players and record-
ers (only when used together with Panasonic VIERA
Link compatible TV)
• Toshiba REGZA-LINK compatible players and record-
ers (only when used together with Toshiba REGZA-
LINK compatible TV)
• Sharp players and recorders (only when used together
with Sharp TV)
*
Models other than those mentioned above may have some
interoperability if compatible with CEC which is part of the
HDMI Standard, but operation cannot be guaranteed.
Note
• Do not connect the
the following number to the HDMI input terminal so that the
linked operations work properly.
–Blu-ray Disc/DVD player is up to three.
–Blu-ray Disc recorder/DVD recorder/Digital Video Recorder is
up to three.
–Cable/Satellite Set-top box is up to four.
• Do not connect the AV receiver to the other AV receiver/AV
amplifier via HDMI.
• When the -compatible component more than the
above-mentioned is connected, the linked operations are not
guaranteed.
-compatible components cannot be guaranteed.
-compatible. (As
-compatible players
-compatible component more than
■
Operations that can be performed with
connection
For -compatible TV
The following linked operation is possible by connecting
the AV receiver to an
• The AV receiver will enter Standby mode when the
power of the TV is turned to Standby.
• You can set on the menu screen of the TV to either out-
put the audio from the speakers connected to the AV
receiver, or from the speakers of the TV.
• It is possible to output the video/audio from the antenna
or from the input jack of the TV from the speakers con-
nected to the AV receiver. (A connection such as optical
digital cable or similar is required above the HDMI
cable.)
• Input to the AV receiver can be selected with the remote
controller of the TV.
• Operations such as volume adjustment or similar for the
AV receiver can be performed from the remote controller
of the TV.
For -compatible players/recorders
The following link operation is possible by connecting the
AV receiver to an
• When the playback is started on the player/recorder,
input of the AV receiver will switch to the HDMI input
of the player/recorder that is playing back.
• Operation of the player/recorder is possible with the
remote controller supplied with the AV receiver.
* Not all functions may operate depending on the model.
-compatible TV.
-compatible player/recorder.
En
101