Connecting A Power Amplifier - Onkyo DTR-40.2 Instruction Manual

Connecting a Power Amplifier

If you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the PRE OUT
jacks, and connect all speakers and the subwoofer to the power amplifier. If you have a powered subwoofer, connect it to
this AV receiver's SUBWOOFER PRE OUT jack. You can connect the powered subwoofer with two SUBWOOFER
PRE OUT jacks respectively. The same signal is output from each jack.
Front left speaker
Center speaker
Front right speaker
Surround left speaker
Surround right speaker
Surround back/Front wide/Front high left speaker*1
Surround back/Front wide/Front high right speaker*1
Note
*1
Specify "None" for the channel that you don't want to output
SB···Surround Back, FH···Front High, FW···Front Wide
En
16
Power amplifier
*1
Powered subwoofer
See "Connecting the Powered
Subwoofers" for more informa-
tion (➔ 15).
(➔ 51).