Using The Pure Direct Mode - Denon DVD-A1XV Operating Instructions Manual

9 USING THE PURE DIRECT MODE

2 In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby achieving high quality sound.
ON / STANDBY
Display the setting mode
Press the PURE DIRECT MEMORY button.
1
• The output status of the video signals, etc., can be
stored at MODE 1 and MODE 2 as desired.
Use the • and ª cursor buttons to select the mode, then
press the ENTER button.
DIGITAL OUTPUT
ON : Digital audio signals are output.
OFF : Digital audio signals are not output.
Does not function for DENON LINK or IEEE1394
digital outputs. For these outputs, set "OFF" at the
initial settings.
VIDEO OUT
ON : Video signals are output.
2
OFF : Video signals are not output.
DISPLAY
ON : It is indicate in Display of the main unit.
OFF : It is not indicate in Display of the main unit.
When the video output is set to "OFF" or "ALL OFF",
neither HDMI video nor audio signals are output.
Also, when the "HDMI AUDIO SETUP" is set to
"MULTI (NORMAL)", the setting of DIGITAL OUTPUT
cannot be made. (See pages 38, 39.)
When DENON LINK and IEEE 1394 settings are valid,
the setting of DIGITAL OUTPUT cannot be selected.
Press the PURE DIRECT MEMORY button.
3
• All of the settings are stored in the memory.
OPEN/CLOSE PLAY STOP
STILL / PAUSE
VIDEO MODE
HDMI / DVI SUPER PURE
SELECT FORMAT AUDIO CD DIRECT
SET UP SELECT
PUSH ENTER
DVD-A1XV
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER
4
PURE DIRECT
MEMORY SELECT
Remote control unit
Remote control unit
57
ANGLE SUBTITLE AUDIO
2
REPEAT A-B
RANDOM MARKER ZOOM DIMMER
4
SETUP PICT ADJ. MEMORY SELECT
1, 3
PURE DIRECT MEMORY
SE TUP
PURE D I R ECT MODE
PURE D I R ECT MODE 1
DI G I T AL OUTPUT
V I DEO OUT
DI SPL AY
SE L EC T : DE C I S I ON : ENT ER BUT TON
PURE DIRECT MEMORY
SE TUP
PURE D I R ECT MODE
PURE D I RE CT MODE 1
DI G I T AL OUTPUT
V I DEO OUT
DI SPL AY
SE L EC T :
DE C I S I ON : ENTER BUT TON
PURE DIRECT
MEMORY SELECT
Remote control unit
MODE1
MODE2
ON
ON
ON
MODE1
ON
OFF