Denon DVD-A1XV Operating Instructions Manual page 48

B When "SPEAKER CONFIGURATION" is selected, use the • and
ª cursor buttons to select the speaker to be set then press the
ENTER button.
• The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the • and ª
cursor buttons to select the speaker type, then press the
ENTER button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
NONE
Select this when no speaker is connected.
YES
Select this when a subwoofer is connected.
NO
Select this when no subwoofer is connected.
• When "CROSSOVER" is selected:
40 Hz, 60 Hz, 80 Hz (Factory default), 100 Hz, 120 Hz, set the
frequency of crossover.
3
Press the RETURN button to return to the "SPEAKER SETUP"
menu.
B When "CHANNEL LEVEL" is selected, use the • and ª cursor
buttons to select the speaker to be adjusted, then use the
cursor buttons to set the level.
1
• TEST TONE
Use the and
0
Adjust so that the volume of the test tones output from the
different speakers sounds the same.
• The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and –10 dB in
steps of 1 dB.
• Settings SW +10 dB to "ON" increases by 10 dB the volume
level that is output from the subwoofer.
Press the RETURN button to return to the "SPEAKER SETUP"
menu.
cursor buttons to select auto or manual.
1
Remote control unit
SPEAKE R SE TUP
SE L ECT :
and
0
SPEAKER SE TUP
SE L EC T :
48
Remote control unit
SPEAKER CONF I GURAT I ON
F RONT SP L ARGE
CENT ER SP L ARGE
SUBWOOF ER YES
SURROUND SP L ARGE
CROSSOVE R 80Hz
DE C I S I ON : ENTER BUT TON
Remote control unit
CHANNEL LEVEL
TE ST TONE OF F
F RONT L CH 0 dB
CENT ER 0 dB
F RONT RCH 0 dB
SURROUND R CH 0 dB
SURROUND L CH 0 dB
0 dB
SUBWOOF ER
SW + 1 0 d B OFF
DE C I S I ON : ENTER BUT TON