Playback
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit
Button only on the main unit
Button only on the remote control unit
<POWER>
<1/3>
Disc tray
<PHONES LEVEL>
OPEN/CLOSE
[PURE DIRECT]
[DIMMER]
[1]
DISC/USB
Preparations
BUTTON
Before Playing a Disc
<BUTTON>
[BUTTON]
1
Turn the DCD-710AE power on. (Press
• When a disc is loaded, playback starts automatically.
• If no disc is loaded "NO DISC" is displayed.
2
DISC/USB
Press
"DISC".
3
Insert a disc.
OPEN/CLOSE(5)
•
Press
•
The disc tray also closes when
pressed.
5
DISC/USB
NOTE
Do not place any foreign objects in the disc tray. Doing so could
damage it.
[POWER]
Before Playing a USB or an iPod
1
Turn the DCD-710AE power on. (Press
2
Connect USB memory device or iPod connection
cable.
• When the USB memory device or iPod is connected to
the USB port on the DCD-710AE, the source media mode
automatically switches to "USB" and file playback begins.
[3]
• The "USB" or "iPod" indicator lights up on the display.
The playback media mode setting remains in the memory, even when
the power is set to standby.
n Turning the Power Off
<POWER>
Press
again.
NOTE
• Be sure to stop playback before turning the power off.
• Make sure that the disc tray is completely shut before turning off
the power.
<POWER>
).
to set the playback media mode to
to open/close the disc tray.
<1/3>
[1]
[3]
,
or
is
<POWER>
).
Operations Possible During
Playback
Switching the Display's Brightness
[DIMMER]
Press
.
Dim
Bright
OFF
b The display's brightness switches each time the button is
pressed.
Listening with Headphones
Plug the headphones (sold separately) into the PHONES
jack.
n Adjusting the Volume
<PHONES LEVEL>
Turn
.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
Switching the Pure Direct Mode
[PURE DIRECT]
In the stop mode, press
MODE 1
MODE 2
• Display : OFF
• Display : OFF
• Digital output : valid
• Digital output : invalid
OFF
• Display : ON
• Digital output : valid
ENGLISH
Dark
.