Exporting And Importing A Configuration - Lexmark MX510 Quick Reference

Setting up Multi Send
Use To
Scan a document, and then send the scanned
document to multiple destinations.
Note: Make sure there is enough space in
the printer hard disk.
1 Open a Web browser, and then type the printer IP address in the
address field.
Note: View the printer IP address on the printer home screen.
The printer IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2
Click Settings > Apps > Apps Management > Multi Send.
3 From the Profiles section, click Add, and then customize the
settings.
Notes:
• See the mouse‑over help beside each field for a description
of the setting.
•
If you select FTP or Share Folder as a destination, then make
sure the location settings of the destination are correct. Type
the correct IP address of the host computer where the
specified destination is located. For more information on
obtaining the IP address of the host computer, see "Finding
the IP address of the computer" on page 3.
4
Click Apply.
To use the application, touch Multi Send on the printer home screen,
and then follow the instructions on the printer display.
Setting up Scan to Network
Use To
Scan a document and send it to a shared
network folder. You can define up to 30
unique folder destinations.
Notes:
• The printer must have permission to
write to the destinations. From the
computer where the destination is
specified, use sharing, security, and
firewall settings to allow the printer at
least a write access. For help, see the
documentation that came with your
operating system.
•
The Scan to Network icon appears only
when one or more destinations are
defined.
1
Open a Web browser, and then type the printer IP address in the
address field.
Note: View the printer IP address on the printer home screen.
The IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
2
Click Settings > Apps > Apps Management > Scan to Network.
3
Specify the destinations, and then customize the settings.
Notes:
•
See the mouse-over help beside some of the fields for a
description of the setting.
• To make sure the location settings of the destination are
correct, type the correct IP address of the host computer
where the specified destination is located. For more
information on obtaining the IP address of the host
computer, see "Finding the IP address of the computer" on
page 3.
•
Make sure the printer has access rights to the folder where
the specified destination is located.
4
Click Apply.
To use the application, touch Scan to Network on the printer home
screen, and then follow the instructions on the printer display.
Setting up Remote Operator Panel
This application shows the printer control panel on your computer
screen and lets you interact with the printer control panel, even when
you are not physically near the network printer. From your computer
4
screen, you can view the printer status, release held print jobs, create
bookmarks, and do other print-related tasks you might normally do
while standing at the network printer.
1
Open a Web browser, and then type the printer IP address in the
address field.
Note: View the printer IP address on the printer home screen.
The IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
2
Click Settings > Remote Operator Panel Settings.
3
Select the Enabled check box, and then customize the settings.
4
Click Submit.
To use the application, click Remote Operator Panel > Launch VNC
Applet.

Exporting and importing a configuration

You can export configuration settings into a text file, and then import
the file to apply the settings to other printers.
1
Open a Web browser, and then type the printer IP address in the
address field.
Note: View the printer IP address on the printer home screen.
The IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
2
To export or import a configuration for one application, do the
following:
a
Click Settings > Apps > Apps Management.
b From the list of installed applications, click the name of the
application you want to configure.
c
Click Configure, and then do either of the following:
• To export a configuration to a file, click Export, and then
follow the instructions on the computer screen to save the
configuration file.
Notes:
– When saving the configuration file, you can type a
unique file name or use the default name.
–
If a "JVM Out of Memory" error occurs, then repeat
the export process until the configuration file is
saved.
• To import a configuration from a file, click Import, and then
browse to the saved configuration file that was exported
from a previously configured printer.