Asus MAXIMUS VI IMPACT User Manual page 174

•
•
•
Wi-Fi GO! & NFC Remote
Wi-Fi GO! & NFC Remote allows you to remotely control your computer using your smart
device.
Smart device supported screen resolutions
Wi-Fi GO! & NFC Remote supports the following screen resolutions of smart devices:
Screen Low density
type
Screen
Resolution
Using Wi-Fi GO! & NFC Remote
To use the Wi-Fi GO! & NFC Remote:
1. Connect your smart device to the same Wi-Fi network as your computer.
For details in connecting your smart device to a Wi-Fi network, refer to the user manual of
your smart device.
2. Tap
Wi-Fi GO!
& NFC Remote
3. Tap the computer that you want to
connect with your smart device.
When done, the Wi-Fi GO & NFC
Remote interface appears on your
smart device.
4-26
To access the Wi-Fi GO! features in your smart device, refer to section Wi-Fi GO! &
NFC Remote of this user manual for more details.
To protect your Wi-Fi utility from other smart devices, click or tap
password.
Ensure that the ASUS AI Suite 3 utility is active when using Wi-Fi GO!.
Medium density
(120 ldpi) (160 mdpi)
WXGA
(1280 x 800)
1024 x 600
1024 x 768
1280 x 768
then tap Enter.
High density Extra high density
(240 hdpi) (320 xhdpi)
1536 x 1152 2048 x 1536
1920 x 1152 2560 x 1536
1920 x 1200 2560 x 1600
Chapter 4: Software support
to set your