Cleaning And Maintenance; Oven Surfaces; Interior; Glass Surfaces - Viking RVM320 Use And Care Manual

Cleaning and Maintenance

Any piece of equipment works better and lasts longer when main-
tained properly and kept clean. Cooking equipment is no exception.
Your Microwave Oven must be kept clean and maintained properly.
Disconnect the power cord before cleaning or leave the door open
to inactivate the oven during cleaning.

Oven Surfaces

The outside surface is precoated metal and plastic. Clean the outside with
mild soap and water; rinse and dry with a soft cloth. Do not use any type
of household or abrasive cleaner. Metal parts will be easier to maintain
if wiped frequently with a damp cloth. Avoid the use of spray and other
harsh cleaners as they may stain, streak or dull the door surface.

Interior

Cleaning is easy because little heat is generated to the interior surfaces;
therefore, there is no baking and setting of spills or spattering. To clean
the interior surfaces, wipe with a soft cloth and warm water. DO NOT
USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. For
heavier soil, use baking soda or a mild soap; rinse thoroughly with hot
water. NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO ANY PART
OF THE OVEN.

Glass Surfaces

Be careful with the edge of the oven door as it is glass and could chip
or break. Wipe the window on both sides with a damp cloth to remove
any spills or spatters.

Stainless Steel Parts

The exterior should be wiped often with a soft damp cloth and polished
with a soft dry cloth to maintain its beauty. There are also a variety of
products designed especially for cleaning and shining the stainless
exterior of the oven. We recommend that the cleaner be applied to a
soft cloth and then carefully used on the stainless exterior rather than
sprayed directly on to it. Follow package directions carefully.
E 32