Removing The Power-Button Board; Replacing The Power-Button Board - Dell Alienware M14x Service Manual

Back to Contents Page
Power-Button Board
Alienware® M14x Service Manual
Removing the Power-Button Board
Replacing the Power-Button Board
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Power-Button Board
1. Follow the instructions in Before You
2. Remove the base cover (see
3. Remove the battery pack (see
4. Remove the center-control cover (see
5. Remove the keyboard (see
6. Remove the palm-rest assembly (see
7. Carefully peel the power-button board cable from the palm-rest assembly.
8. Remove the two screws that secure the power-button board to the palm- rest assembly.
9. Lift the power-button board along with its cable away from the palm-rest assembly.
1 power-button board
3 power-button board cable
Replacing the Power-Button Board
1. Follow the instructions in Before You
2. Slide the power-button board cable through the slot on the palm-rest assembly.
3. Use the alignment posts on the palm-rest assembly to place the power- button board in place.
Begin.
Removing the Base Cover).
Removing the Battery Pack).
Removing the Center-Control
Removing the Keyboard).
Removing the Palm-Rest
2 screws (2)
Begin.
Removing the Battery
Cover).
Assembly).
Pack) before working inside the