1. Follow the instructions in
Before You Begin
2. Align the screw hole on the Bluetooth card with the screw hole on the system board.
3. Replace the screw that secures the Bluetooth card to the computer base.
4. Connect the Bluetooth-card cable to the connector on the system board.
5. Replace the palm-rest assembly (see
6. Replace the keyboard (see
7. Replace the center-control cover (see
8. Replace the battery pack (see
9. Replace the base cover (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Replacing the Palm-Rest
Replacing the
Keyboard).
Replacing the Center-Control
Replacing the Battery
Pack).
Replacing the Base
Cover).
Assembly).
Cover).