Replacing The Status-Light Board - Dell Alienware M14x Service Manual

1 status-light board
Replacing the Status-Light Board
1. Follow the instructions in Before You
2. Align the slot on the status-light board with the alignment post on the palm rest assembly.
3. Replace the screw that secures the status-light board to the palm-rest assembly.
4. Route the status-light board cable through the routing guides on the palm- rest assembly.
5. Replace the palm-rest assembly (see
6. Replace the keyboard (see
7. Replace the center-control cover (see
8. Replace the battery pack (see
9. Replace the base cover (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
2 screw
Begin.
Replacing the Palm-Rest
Replacing the Keyboard).
Replacing the Center-Control
Replacing the Battery Pack).
Replacing the Base Cover).
Assembly).
Cover).