Installation On A Mac Os X - FujiFilm FinePix Z100fd Owner's Manual

Installation on a Mac OS X

Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
1
Compatible Mac
*
Operating System
RAM
Hard disk space
Display
3
Internet connection
*
1
* PowerPC, Intel processor loaded
2
* Models with a USB port as a standard feature
3
* Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use
an extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
2
Power Macintosh G3 , PowerBook G3
*
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, or Mac mini
Mac OS X (compatible with version 10.3.9 to 10.4.10)
256 MB minimum
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
800 × 600 pixels or better, at least 32,000 colors
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
2
,
*
Continued Q
121