FujiFilm FinePix Z100fd Owner's Manual page 137

Warning Displayed
Prints were specified for 1000 or more frames in the
DPOF frame settings.
[DPOF FILE ERROR]
[CAN NOT SET DPOF] An attempt was made to specify DPOF settings for
an image that is not supported by DPOF.
[r CAN NOT SET DPOF]
[CAN NOT ROTATE] An attempt was made to rotate a movie or an image
shot using a camera other than FinePix Z100fd.
[r CAN NOT ROTATE]
[r CANNOT EXECUTE] An attempt was made to transmit or save an image
or movie recorded with another device, or an image
[ CANNOT EXECUTE] that cannot be played back, with TRIMMING FOR
BLOG.
[ CANNOT EXECUTE]
An attempt was made to resave an image that was
[ CANNOT EXECUTE]
saved with [TRIMMING FOR BLOG].
An attempt was made to take a picture in
[ CANNOT EXECUTE] [
LCD monitor.
[PRESS AND HOLD THE An attempt was made to set flash or sound in Silent
DISP BUTTON TO mode.
DEACTIVATE SILENT
MODE]
The camera is not connected to a PC or printer.
[COMMUNICATION
ERROR]
Explanation
AUCTION MODE] while
The maximum number of frames for which prints can
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints
onto another Memory Card and then specify the
DPOF settings.
DPOF printing cannot be used with this image
format.
These images cannot be rotated by image formats.
Some image formats cannot be transmitted or saved
with TRIMMING FOR BLOG.
Images saved with [TRIMMING FOR BLOG] cannot
be resaved.
Charge the battery or replace with a charged battery.
appeared in the
Flash or sound cannot be set in the Silent mode.
Release the Silent mode to set flash or sound.
• Check that the USB cable is connected correctly.
• Check that your PC or printer is turned on.
• When using IR communication, make sure the
camera and the other device are transmitting and
receiving within the image transmission range.
Remedy
Continued Q
137