FujiFilm FinePix Z100fd Owner's Manual page 120

Installation on a Windows PC
Do not connect the camera to your PC
until the software installation is
completed.
1
Install FinePixViewer as instructed by the
on-screen instructions.
Launching the installer manually
A Double-click the "My Computer" icon.
Windows XP users should click "My Computer" in the "Start"
*
menu.
Windows Vista users should click "Computer" in the "Start"
menu.
B Right-click "FINEPIX" (CD-ROM drive) in the "My
Computer" window (Windows Vista users: in the
"Computer" window) and select "Open".
C Double-click "SETUP" or "SETUP.exe" in the CD-ROM
window.
The way file names are displayed differs as described below
*
depending on your PC settings.
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g. Setup
or SETUP).
120
For Windows Vista users:
When loading the bundled CD-ROM on your PC, the
"AutoPlay" window may appear. In this case, click
"SETUP.exe".
When "User Account Control" window appears, click
"Allow".
2
Install DirectX as directed by the on-screen
instructions and then restart your PC. If the
latest version of DirectX is already installed
on your PC, this installation is not
performed.
CAUTION
• If the latest version is already installed, this window
does not appear.
• Do not remove the CD-ROM during this procedure.
3
After restarting the PC, a message appears
stating "Installation of the FinePixViewer
has been completed".