FujiFilm FinePix Z100fd Owner's Manual page 93

MEMO
• When DPOF settings were specified on another
camera.
RESET DPOF OK? RESET DPOF OK?
YES YES NO NO
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
[ RESET DPOF OK?] appears.
Pressing MENU/OK erases all of the DPOF settings
already specified for each frame (file). Specify the
DPOF setting for each frame (file) again.
• Prints of up to 999 frames (files) can be ordered on the
same Memory Card.
• DPOF settings cannot be specified for movies.
CAUTION
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the [WITH DATE] setting, the date is
imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
• Images photographed with a camera other than FinePix
Z100fd may not be specified DPOF settings.
Setting the playback menu (➝p.84)
Intelligent Face Detection
PRINT ORDER (DPOF) PRINT ORDER (DPOF)
DPOF : 00000 DPOF : 00000
00 00 SHEETS SHEETS
FACE COUNT FACE COUNT
FRAME FRAME SET SET
When setting images taken with Intelligent Face
Detection (➝p.31) ( appears on the LCD monitor), if
you press (Intelligent Face Detection), frames appear
around the faces detected by the camera, and the number
of frames is set as the number of prints. This allows you
to easily prepare the same number of prints as the
number of people detected by the camera.
In addition, you can adjust the number of prints by
n o
pressing or . To reset the number of prints to the
number of detected faces, press
Detection) again.
Make sure to press MENU/OK when your settings are
complete.
(Intelligent Face
Continued Q
93