Configuring Usb Protocol Settings; Selecting The Screen Aspect Ratio And Video Output System - HP p550 User Manual

Configuring USB Protocol Settings (USB)
Procedure
[SET] MENU
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Select this setting when connecting to a computer (pages 80, 81).
Mass With this setting, the computer sees the camera as an external
Storage storage device. Use this setting for normal transfer of images from
the camera to a computer.
Select this setting when connecting to a printer that supports
PTP
PictBridge (page 75). This setting simplifies the transfer of Photo
(PictBridge)
files to the connected device.

Selecting the Screen Aspect Ratio and Video Output System

(TV Out)
Procedure
[SET] MENU
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC
Video system used in Japan, the U.S., and other countries
PAL Video system used in Europe and other areas
4:3 Normal TV screen aspect ratio
16:9 Wide screen aspect ratio
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Photos will not display correctly if you select the wrong aspect ratio.
• Photos will not display correctly unless the camera's video signal output setting
matches the video signal system of the TV or other video equipment.
• Photos cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
Set Up Tab USB
Set Up Tab TV Out
94