Table of Contents
Advertisement
NOTE
• Stabilizer is disabled during video recording.
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen
when you half-press the shutter button while "On" is selected. These values will
appear briefly, however, in the preview image that is displayed immediately after
you shoot a photo.
• Shooting while "On" is selected can cause a photo to appear somewhat coarser
than normal and can cause slight deterioration of photo resolution.
• Stabilizer may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• Stabilizer may not work properly when the camera is mounted on a tripod. Turn off
Stabilizer.
Specifying the Auto Focus Area (AF Area)
Procedure
[
] (REC)
[SET]
This mode takes readings of a small area in the center of the
Spot
image. This setting works well with focus lock (page 55).
When you half-press the shutter button while this setting is
selected, the camera will select the optimum Auto Focus area
Multi
from among nine possible areas. The focus frame of the area
where the camera focuses will be displayed in green.
Half-pressing the shutter button focuses on the subject and
Tracking
causes the focus frame to track the movement of the subject.
Spot" or
"
Focus frame
IMPORTANT!
• Selecting "
Tracking" can cause vibration and noise to occur due to lens
operation while tracking a subject. This does not indicate malfunction.
MENU
REC Tab
Tracking"
"
AF Area
"
Focus frame
58
Multi"
Advertisement
Table of Contents
