3.
Install the:
a) drive cage
b) optical drive
c) front bezel
d) cover
4.
Follow the procedures in
Removing the Input/Output (I/O) Panel
1.
Follow the procedures in
2.
Remove the:
a) cover
b) optical drive
c) drive cage
d) front bezel
3.
Disconnect the I/O panel or FlyWire cable and the audio cable from the system board.
4.
Remove the screw that secures the I/O panel to the chassis. Then, slide the I/O panel to release and remove it from
the computer.
After Working Inside Your Computer .
Before Working Inside Your Computer .
21