4.
Remove the screw and pull the power switch board out of the computer.
Installing the Power Switch
1.
Slide the power-switch through the front of the computer and tighten the screw.
2.
Connect the power-switch cable to the chassis.
3.
Install the drive cage.
4.
Install the front bezel.
5.
Install the cover.
6.
Follow the procedures in
Removing the Input/Output(I/O) Panel
1.
Follow the procedures in
2.
Remove:
a) cover
b) front bezel
c) drive cage
3.
Release the power cable and I/O cable from the chassis clip.
20
After Working Inside Your Computer .
Before Working Inside Your Computer .