2 Insert two AAA batteries (not included) into the battery compartment.
Make sure that the + and – symbols on the batteries align with the +
and – symbols inside the compartment.
3 Insert the tab on the battery compartment cover into the slot on the
battery compartment, then press the cover down until it clicks into
place.
Connecting the AC/DC power adapter
To connect the AC/DC power adapter:
1 Plug the small connector on the power adapter into the DC IN jack on
the back of your radio.
2 Plug the other connector on the power adapter into a power outlet.
Using your radio
Setting the time
To set the time:
1 Press Sleep
the LCD.
2 Press
hour.
3 Press Sleep
4 Press
the minutes.
5 Press Sleep
mode.
8
NS-CLBT01-B/NS-CLBT01-W Digital Clock Radio with Bluetooth
Note
If you unplug the AC/DC power adapter and the backup batteries
are dead or not installed, the time setting is lost.
Note
"AM" or "PM" appears on the LCD to the right of the time. When
you set the time, make sure that the "AM" or "PM" displays
correctly.
for about two seconds until the hour digits blink on
or
to increase the hour or press
again. The minutes digits blink on the LCD.
or
to increase the minutes or press
again to save the time setting and exit time setting
www.insigniaproducts.com
or
to decrease the
or
to decrease