Connecting The Ac/Dc Power Adapter - Insignia NS-CLBT02 User Manual

2 Insert two AAA batteries (not included) into the battery compartment.
Make sure that the + and – symbols on the batteries align with the +
and – symbols inside the compartment.
3 Insert the tab on the battery compartment cover into the slot on the
battery compartment, then press the cover down until it clicks into
place.

Connecting the AC/DC power adapter

To connect the AC/DC power adapter:
1 Plug the small connector on the power adapter into the DC IN jack on
the back of your radio.
2 Plug the other connector on the power adapter into a power outlet.
8
Note
If you unplug the AC/DC power adapter and the backup batteries
are dead or not installed, the time setting is lost.
www.insigniaproducts.com
NS-CLBT02 Digital Clock Radio with Bluetooth