Product Hardware Features - TRENDnet TEW-800MB User Manual

TRENDnet User's Guide

Product Hardware Features

Rear View
WPS Button
Gigabit LAN
Ports 1-4 (Black)
Power Port
• WPS Button (Wi-Fi Protected Setup)* – Push and hold this button for 5
seconds to activate WPS. The Power LED will blink when WPS is activated.
•
Gigabit LAN Ports 1-4 – Connect Ethernet cables (also called network cables)
from your media bridge's LAN ports to your wired network devices.
© Copyright 2013 TRENDnet. All Rights Reserved.
On/Off Power Switch
(EU only)
Reset Button (Located on Bottom)
• Power Port – Connect the included power adapter to your media bridge's
power port and then to an available power outlet.
•
On/Off Power Switch (EU Only) – Push the media bridge's On/Off power
switch to turn your media bridge "On" (Inner position) or "Off" (Outer
position).
• Reset Button (Located on Bottom) – Press and hold this button for 10 seconds
to reset the media bridge.
*In WPS mode, the TEW-800MB may connect to your router on the default 2.4GHz
band. Please refer to the Manual setting of the Basic Wireless Setting section, for the
5GHz band choice.
TEW-800MB
4