TRENDnet User's Guide
Product Hardware Features
Rear View
•
AC Power Connector – Connect the AC power cord to the connector and the
other side into a power outlet. (Input: 100~240VAC, 50/60Hz)
© Copyright 2013 TRENDnet. All Rights Reserved.
Front View
Button
AC Power Connector
Diagnostic LEDs
Reset
Gigabit Ports
Power
LED
•
Reset Button – Press and hold this button for 10 seconds and release to
reset the switch to factory defaults.
•
Gigabit Ethernet Ports (1-16) – Connect network devices. Ports 15-16
are shared with SFP slots 15F-16F and disabled when SFP slots (15F-16F)
are in use and can be used for uplink or downlink connections.
•
SFP slots (15F-16F) – Supports optional 1000BASE-SX/LX mini-GBIC
modules.
•
Power (PWR) LED
: When the Power LED lights on, the device is receiving
On
power.
: When the Power turns off or the power cord is not
Off
connected
TEG-160WS
Gigabit Ports w/
shared SFP Slots
2